Reinventing Waterjet

The industry’s most robust waterjet solution, unmatched in technology and design.

Get a Test Cut

Reinventing Waterjet

The industry’s most robust waterjet solution, unmatched in technology and design.

Get a Test Cut

The Mach 700 Series

Think Big

The Mach 700 waterjet is the ideal cutting solution for heavy industry. Available with a dual bridge, the Mach 700 series is a large format waterjet designed for demanding environments and exacting expectations. The ideal combination of size, speed, and accuracy: make a big impact on your bottom line with the Mach 700.

Compare Mach Series Download Brochure

The Mach 700 is sized for production

Sized for Production

The Mach 700 excels in demanding, heavy industry environments. Cut large parts and heavy materials with ease, load and unload efficiently, add an additional gantry and multiple cutting heads to drive production to new levels.

Reduce cycle time and accelerate accuracy with the Mach 700

Accelerate Speed & Accuracy

Reduce cycle time with fast and nimble acceleration and deceleration. The Mach 700 cuts with astounding speed, driving overall part processing times down. Industry leading helical rack and pinion drive system ensures smooth motion across the table for accurate and precise cutting.

The Mach 700 is engineered tough for heavy industry use

Engineered Tough

The Mach 700 is engineered for strength and speed, built with all-steel construction to handle heavy duty use 24/7. Engineered to order, the Mach 700 will integrate directly into your current production.

The roll-around control increases flexibility of the Mach 700

Roll-Around Control

Take your control console with you as you work, giving you the flexibility to move freely about your waterjet.

Flow provides comprehensive service and support for the Mach 700

Big Support

With the Mach 700 you are guaranteed a total solution: complete with service, software, and cutting edge technology. Flow delivers more productivity and reliability with service solutions for parts, training, and preventative maintenance.


Engineered-to-Order

Designed exactly for your production needs.

Mach 700 4080 4080
Mach 700 40150 40150
Mach 700 40240 40240
Mach 700 5080 5080
Mach 700 50240 50240

Specifications

Rapid Traverse Maximum

up to 1,417 in/min [36 m/min]

Linear Straightness Accuracy

± 0.0015 in per 3 ft [± 0.038 mm/m]

Repeatability

0.001 in [0.03 mm]


Core Component Options

Dynamic Waterjet® XD
Get accurate 5-axis motion with Flow's Dynamic XD 3D bevel cutting technology. Capable of cutting compound angles with high accuracy, Dynamic XD is the fastest, most accurate, cutting head with the greatest amount of flexibility.

Standard
Flow's standard cutting head technology is bes-in-class. Using ultrahigh-pressurized water mixed with abrasive, create a high-speed waterjet stream capable of cutting virtually any hard material via supersonic erosion. Get the flexibility for underwater or above water operation, and abrasive or pure waterjet cutting.

Dynamic Waterjet®
Increase the speed and accuracy of your Mach 700 with Flow's Dynamic Waterjet cutting head technology. SmartStream technology controls an articulated wrist to automatically tilt, compensating for stream lag and taper.

HyPlex® Prime
60,000 psi [4,150 bar]
The highest pressure, most advanced direct drive pump available today, with pressures rated at 60,000 psi [4,150 bar].

MotoJet™
60,000 psi [4,150 bar]
With continuous operating pressure at 60,000 psi [4150 bar], the MotoJet is built for the demands of high-production environments.

MotoJet™ X
60,000 psi [4,150 bar]
The first full-service pump with uptime and technology guarantees. Engineered to maximize uptime, minimize maintenance, and outlast and outperform the rest.

HyperJet®
94,000 psi [6,500 bar]
Provides maximum productivity with continuous operating pressures of 87,000 [6,000 bar].

FlowXpert®
Fully integrated 3D modeling and waterjet pathing software that is uncomplicated, easy, and fast for maximum efficiency of the Mach 700.

FlowPath
Take the guesswork out of making high quality parts, regardless of operator skill level, with FlowPath's easy-to-use CAD drawing tools.

FlowCut®
Speed up production of your Mach 700 with FlowCut's machine controller - a smart and easy-to-use machine control software.

FlowNest
Gain production efficiency with advanced batch processing that allows input of several large nesting jobs.  With a simple input by the operator, FlowNest automatically nests your parts.

We are dedicated to you

When you invest in your shop, you expect the best. We are committed to providing you with the tools you need to keep your system running it's best. Professional training is available in both classroom settings, as well as on-site. Learn more about Flow's service commitment

Explore Our Resources

Everything you need, from waterjet videos, to whitepapers, and more.

Explore Now

Why Waterjet

Not sure if waterjet is right for you? Find out the key factors you need to know to

find your perfect fit