Surface Preparation Nozzles
Flow offers a line of accessories and nozzles that are unmatched for overall job productivity and reliability --- the lightest lances, the most efficient nozzles, and the highest nozzle rotating speeds.
5-Jet Nozzle
This nozzle is the most widely used nozzle for coating removal. The 5-jet nozzle works perfectly for removing marine and industrial coatings. You can run two lances off one Husky pump while cleaning a 3 inch wide strip with each pass. The 5-jet can also be used for light concrete scarification where either the coating is removed from the concrete or the concrete itself needs to be lightly scarred.
4-Jet Nozzle
The 4-Jet nozzle is used for removal of tough coatings when your nozzle requires extra cutting power. Typical uses are removing rubber tank linings or thick fiberglass coatings. This nozzle can also be used for light concrete removal.
9-Jet Nozzle
Use this tip for two applications. First, for very light coatings that do not take the concentrated energy of a 5-jet nozzle, the 9-jet allows you to remove coatings faster because it cleans a much wider path with each pass. Second, the 9-jet works very well for sweeping work where only a layer of paint needs to be removed.
2-Jet Nozzle
Used for extremely hard to remove coatings, the 2-jet nozzle is the most powerful nozzle offered. It is typically used on very thick build ups in petrochemcial plants, deep concentrate removal or very hard thick polymers or rubbers.
5-Jet 90 Degree
This nozzle has ports firing to the sides and is used to clean the blind sides of structural angles where a regular nozzle cannot reach.
5-Jet Fan Jet
This nozzle works exceptionally well for removing one layer of coating at a time or for sweeping when a failed coating is to be removed.